door alarm sensor

wireless alarm systems for the home

The typical sensors, which are usually two magnets, are generally installed on doors and windows such that one magnet is connected to the door or window and the other is connected to the door or window frame. When the door or window is opened, one magnet is removed from the surrounding area of the other and the sensor registers that the door has been opened. More advanced home alarm systems may also contain vibration sensors to detect when glass has been broken by measuring the vibrations caused by the breakage. Also, many systems use motion sensors that compute the proximity of a room’s walls by producing infrared beams and measuring the time required for them to bounce back; if a beam comes back sooner than expected, it likely bounced off of a person and the sensor registers motion. When the alarm system is installed, each sensor is registered with the control panel either through wires or wirelessly. The control panel also interfaces with keypads and other input devices used by the home owner to control the system.

home security systems chicago

Data space mapped CPU, port, and peripheral registers. The program counter is also mapped into the data space and writable. There is no distinction between memory space and register space because the RAM serves the job of both memory and registers, and it is usually just referred to as the register file. The keypad:This device is used to enter the password selected by the user and to arm or disarm the alarm by selecting the various profiles installed in the system. As you can see from our project’s picture we used a 4 x 4 keypad, as instructed by Dr. Ayoubi we started off our project by working on the keypad and testing it on Proteus and on the PIC itself.