security for the home

home security alarm systems

Most instructions are single cycle execution, with one delay cycle on branches and skips. All RAM locations function as registers as both source and destination of math and other functions. A hardware stack for storing return addresses. Data space mapped CPU, port, and peripheral registers. The program counter is also mapped into the data space and writable. There is no distinction between memory space and register space because the RAM serves the job of both memory and registers, and it is usually just referred to as the register file.

security system reviews

Passive infrared sensors: Detect motion by sensing a sudden change in heat. Dual Tech motion detectors use two different technologies in the same unit: passive infrared and microwave. These devices are designed to avoid false alarms since both technologies must detect motion before setting off the alarm. Photoelectric Sensors: These sensors project a beam of light across a hall or doorway to detect motion and are triggered when a person passing through interrupts the beam. Glass Break Detectors: Usually mounted near windows to detect the specific high frequency sound of glass being shattered. They are usually installed on a wall opposite or adjacent to the protected glass and are effective within about 15′ to 25′. Smoke and Heat Detectors: Detect smoke and heat. Chapter II:Our Home Alarm SystemOur Home Alarm System:Our project’s main concern was to build a Home Alarm System using a PIC microcontroller. We started off our project by coding the Keypad, then LCD and the final touch was the sensor. We also added two types of buzzers: one to sound the alarm and the other as a key tone buzzer. The final result turned out to be the following:Figure3.